Just a "T" made from 2 pieces of 1x2 pine (or white wood and Home Depot (HD) likes to call it). All measurements and symbols are standard hardware store gibberish. Single quote ' means feet and double quote " means inches. 1x2 refers to 1 inch thick and 2 inches wide with an unknown length (of course it's not actually 1" by 2" and the only length you can get is 8').
I bought an 8' piece of 1x2 at HD and had them cut it in half so it would fit in my car. I cut 1 piece 29" long (cap of T) and the other 39" (trunk of T).
I set the two pieces together in a T shape
Added a couple of small nails (1.5")
And some duck tape
Last Updated 08/29/03