The Washer

Standard FCG construction requires you to drill 3 small holes in a washer to connect strings from the crank to the ghost. This designee eliminates having to drill the holes

Here are the parts. A #10 fender washer (the big one lower right) and 3 regular 1/4" washers (which will function like the holes in a standard FCG ghost washer)

    pdq_fcg2.JPG (43046 bytes)

    Ruff up the washers with sand paper                                    Apply epoxy glue to one side of the big washer

        pdq_fcg3.JPG (68495 bytes)    pdq_fcg8.JPG (48688 bytes)

    Stick the little washers onto the big washer (I used extra, big washers to help hold the little washers flat against the big one with glue) and let the glue dry

    pdq_fcg6.JPG (49152 bytes)    pdq_fcg5.JPG (45681 bytes)

    Finished product

    PDQ_FCG_85.JPG (45095 bytes)    PDQ_FCG_84.JPG (45201 bytes)

Last Update 09/30/03